2009 Mems Inertial Sensors Status And Trends Of 2010

Posted by admin on Jun 12th, 2010 | 1 comment

Inertial sensors including accelerometers (or accelerometer sensor of dollars) and the angular rate sensor (gyroscope) and their single, double, three-axis combined IMU (Inertial Measurement Unit), AHRS (including magnetic sensor attitude reference system).

Is the use of MEMS accelerometer inertial sensing the quality of force measurement sensor, the general standard of quality from the block (sensor element) and the detection circuit. According to the different sensing principle, mainly piezoresistive, capacitive, piezoelectric type, the tunnel current-type, resonance type, thermal and electromagnetic coupling type and so on.

In 1998, the United States CSDL design and development of the first MEMS gyroscope. In the same year, Drapor lab developed another form of MEMS gyroscope.

MEMS gyroscope is the use of vibration-mass has been the base (shell) driven rotation of the Coriolis effect to the principle of the angular velocity sensor is made.

Mainly in the form of framework-driven (inside and outside the framework of the two kinds) comb-drive type, electromagnetic-driven and so on.

IMU because it is combination of MEMS technology, micro-inertial measurement unit, so many places called MIMU. Mainly by the three MEMS accelerometers and three gyro and the solver circuit.

AHRS consists of three magnetic sensors, compared with the IMU, and based on four elements in France to understand calculation, can output directly to a sports body pitch angle, roll angle and heading angle.

Low-precision MEMS inertial sensors, as consumer electronics products are mainly used in mobile phones, game consoles, music players, wireless mouse, digital cameras, PD, hard disk protector, smart toys, pedometer, anti-theft system, GPS navigation, portable. Because of acceleration measurement, tilt measurement, vibration measurement and even rotational measurements and other basic measurements, to be excavated consumer electronics applications will continue to emerge.

Intermediate grade MEMS inertial sensors for industrial and automotive grade products, are mainly used in automotive electronic stability systems (ESP or ESC) GPS-assisted navigation systems, automobile airbags, vehicle attitude measurement, precision agriculture, industrial automation, large-scale medical equipment, robotics , instruments | instruments and meters, construction machinery and so on.

High-precision MEMS inertial sensors as a military-grade and aerospace level products, the main demand high precision, the whole temperature range, shock and other indices. Mainly used in wireless communications satellite, missile seeker, optical targeting systems, stability of the applications; aircraft / missile flight control, attitude control, yaw damping control applications, as well as medium-range missile guidance, inertial-guided GPS navigation applications, remote aircraft ship equipment, battlefield robots.

For consumer electronics of MEMS inertial sensors, the main requirement is that the low price, small size, narrow temperature range, so accuracy is low, or even functional products. Acceleration sensors, light weight, power consumption is small, generally measuring range 1 ~ 10g ~ 50g, Resolution 2mg ~ 10mg, top general in the range ± 300 ° / s, zero-bias in the 500 ° / h ~ 1000 ° / h, so some companies products do not give a zero bias indicators or to give 0.1 ° / s ~ 0.5 ° / s.

MEMS accelerometer can be produced at present the companies are more, most of the semiconductor, such as the United States, ADI, Invensense, ST, Freescale, Sensor Dynamics, MSI (ICSensor), MEMSIC (producer in Wuxi, China) Europe, VTI, Infine, production MEMS gyroscope’s the United States, ADI, Knoix, ST, Europe, Infine, Methes, Japan, Murata, National, Oki, Fujitsu. December 3 Di Semiconductor Co., Ltd. Shenzhen, Shanghai, China issued a consumer-grade MEMS gyro, a company in Wuxi is also in development.

Himfr.com reports MEMS sensor market prospects good

Posted by admin on May 19th, 2010 | 0 comments

Sensor is able to feel the provisions were measured according to certain rules and can be used to convert the output signal of the device or devices. Sensor as a cutting-edge technology of modern technology, modern information technology is considered one of the three pillars.

MEMS (Micro-Electro-Mechanical Systems) is the abbreviation of micro-electromechanical systems, MEMS technology is based on micro / nano based on is a micro / nano-materials design, processing, manufacturing, measurement and control technology, a complete MEMS by the micro-sensors, micro actuators, signal processing and control circuit, communication interface and power | voltage regulator composed of components such as integrated micro-device system.

MEMS sensor able to access to information, processing and implementation of the integrated to form a multi-functional micro-systems, thus greatly improving system automation, intelligence and reliability standards. It also allows manufacturers to incorporate all the features of a product integrated into a single chip, thereby reducing costs for mass production.

MEMS sensors are currently mainly used in two major areas of automotive and consumer electronics. According to ICInsight latest report is expected from 2007 to 2012, the global MEMS-based semiconductor sensors and brake sales will reach 19% of the average annual compound growth rate (CAGR), and in 2007 compared to 4.1 billion U.S. dollars, five will achieve the 9.7 billion in annual sales. 2007 to 2012, based on MEMS sensors and brake unit shipments will be 27% CAGR growth in 2007 shipments of 1.3 billion, will reach 4.3 billion after five years.

During the same period sensor / actuator unit shipments are expected to 23% CAGR growth in shipments in 2012 will reach 12.1 billion in 2007 shipments of 43 million items. Including various types of technology in sensor / actuator, its total market size is expected to reach 11.9 billion U.S. dollars. According to the report, based on MEMS-brake in 2007, will account for the overall sensor / actuator market share of 54%. People think that the era of things, MEMS sensors by virtue of its small size, low cost, and can be integrated with other smart chip, the great advantage of the sensor will become the main production technology.